Operator Overloading
- Source: https://www.freebasic.net/wiki/wikka.php?wakka=ProPgOperatorOverloading
- Last revised: 2024-03-24
Changing the way user defined types work with built-in operators.
Overview
Simply, operators are procedures, and their arguments are called operands. Operators that take one operand (Operator Not) are called unary operators, operators that take two operands (Operator +) are called binary operators and operators taking three operands (Operator Iif) are called ternary operators.
Most operators are not called like procedures. Instead, their operator symbol is placed next to their operands. For unary operators, their sole operand is placed to the right of the symbol. For binary operators, their operands - referred to as the left and right-hand side operands - are placed to the left and right of the operator symbol. FreeBASIC has one ternary operator, Operator Iif, and it is called like a procedure, with its operands comma-separated surrounded by parenthesis.
For example, the following code calls Operator Iif to determine if a pointer is valid. If it is, Operator * (Value of) is called to dereference the pointer, and if not, Operator / (Divide) is called to find the value of twenty divided by four:
start GeSHi
Dim i As Integer = 420
Dim p As Integer Ptr = @i
Dim result As Integer = IIf( p, *p, CInt( 20 / 4 ) )end GeSHi
Notice the call to Operator Iif is similar to a procedure call, while the calls to Operator * (Value of) and Operator / (Divide) are not. In the example, p is the operand to Operator * (Value of), and 20 and 4 are the left and right-hand side operands of Operator / (Divide), respectively.
All operators in FreeBASIC are predefined to take operands of standard data types, like Integer and Single, but they may also be overloaded for user-defined types; that is, they can be defined to accept operands that are objects as well. There are two types of operators that can be overloaded, global operators and member operators.
Global Operators
Global operators are those that are declared in module-level scope (globally). These are the operators - (Negate), Not (Bitwise not), -> (Pointer to member access), * (Value of), + (Add), - (Subtract), * (Multiply), / (Divide), \ (Integer divide), & (Concatenate), Mod (Modulus), Shl (Shift left), Shr (Shift right), And (Bitwise and), Or (Bitwise or), Xor (Bitwise xor), Imp (Bitwise imp), Eqv (Bitwise eqv), ^ (Exponentiate), = (Equal), <> (Not equal), < (Less than), > (Greater than), <= (Less than or equal), >= (Greater than or equal), Abs, Sgn, Fix, Frac, Int, Exp, Log, Sin, Asin, Cos, Acos, Tan, Atan, Len, and Sqr.
Declaring a custom global operator is similar to declaring a procedure. The Declare keyword is used with the Operator keyword. The operator symbol is placed next followed by the comma-separated list of parameters surrounded in parenthesis that will represent the operands passed to the operator. Unlike procedures, operators can be overloaded by default, so the Overload keyword is not necessary when declaring custom operators. At least one of the operator's parameters must be of user-defined type (after all, operators with built-in type parameters are already defined).
The following example declares the global operators - (Negate) and + (Multiply) to accept operands of a user-defined type:
start GeSHi
Type Rational
As Integer numerator, denominator
End Type
Operator - (ByRef rhs As Rational) As Rational
Return Type(-rhs.numerator, rhs.denominator)
End Operator
Operator * (ByRef lhs As Rational, ByRef rhs As Rational) As Rational
Return Type(lhs.numerator * rhs.numerator, _
lhs.denominator * rhs.denominator)
End Operator
Dim As Rational r1 = (2, 3), r2 = (3, 4)
Dim As Rational r3 = -(r1 * r2)
Print r3.numerator & "/" & r3.denominatorend GeSHi
Here the global operators are defined for type Rational, and are used in the initialization expression for r3. The output is -6/12.
Member Operators
Member operators are declared inside a Type or Class definition, like member procedures, and they are the cast and assignment operators Operator Cast (Cast), Operator @ (Address of), Operator [] (Pointer index), Operator New Overload, Operator Delete Overload, Operator For (iteration), Operator Step (Iteration), Operator Next (Iteration), Let (Assign), += (Add and assign), -= (Subtract and assign), *= (Multiply and assign), /= (Divide and assign), \= (Integer divide and assign), ^= (Exponentiate and assign), &= (Concat and assign), Mod= (Modulus and assign), Shl= (Shift left and assign), Shr= (Shift right and assign), And= (Conjunction and assign), Or= (Inclusive disjunction and assign), Xor= (Exclusive disjunction and assign), Imp= (Implication and assign) and Eqv= (Equivalence and assign).
When declaring member operators, the Declare and Operator keywords are used followed by the operator symbol and its parameter list. Like member procedures, member operators are defined outside the Type or Class definition, and the symbol name is prefixed with the name of the Type or Class name.
The following example overloads the member operators Operator Cast (Cast) and *= (Multiply and assign) for objects of a user-defined type:
start GeSHi
Type Rational
As Integer numerator, denominator
Declare Operator Cast () As Double
Declare Operator Cast () As String
Declare Operator *= (ByRef rhs As Rational)
End Type
Operator Rational.Cast () As Double
Return numerator / denominator
End Operator
Operator Rational.Cast () As String
Return numerator & "/" & denominator
End Operator
Operator Rational.*= (ByRef rhs As Rational)
numerator *= rhs.numerator
denominator *= rhs.denominator
End Operator
Dim As Rational r1 = (2, 3), r2 = (3, 4)
r1 *= r2
Dim As Double d = r1
Print r1, dend GeSHi
Notice that the member operator Cast (Cast) is declared twice, once for the conversion to Double and once for the conversion to String. This is the only operator (or procedure) that can be declared multiple times when only the return type differs. The compiler decides which cast overload to call based on how the object is used (in the initialization of the Double d, Rational.Cast as double is called, and in the Print statement, Rational.Cast as string is used instead).
Special Cases of Operators: '.' (Member access), '@' (Address of), '->' (Pointer to member access), and '*' (Value of)
- Overloading
Operator . (Member access)
The operator '.' (member access) cannot be overloaded.
- Overloading
Operator @ (Address of)
The operator @ (Adress of) is used to access the address of a variable.
There is no many interest to overload this operator for an object, and moreover if we did, we could no longer access its address.
- Overloading
Operator -> (Pointer to member access)andOperator * (Value of)
The operator -> (Pointer to member access) is used to access any member of an object (instance) via a pointer to this instance.
The operator * (Value of) is used to access to variable via a pointer to this variable.
Under normal circumstances, the operand of these operators must be a pointer:
Declare Operator -> ( ByRef lhs As T Ptr ) ByRef As U
Declare Operator * ( ByRef rhs As T Ptr ) ByRef As TOverloading of these operators allows you to create a pointer wrapper class and let it behave like the pointer itself:
Declare Operator -> ( ByRef lhs As wrapperClass ) ByRef As U
Declare Operator * ( ByRef rhs As wrapperClass ) ByRef As UThe wrapper can be then used (to access a member) like:
wrapper->member
instead of:
wrapper.realPointer->member
and:
(*wrapper).member
instead of:
(*wrapper.realPointer).member
Clarifying the particular case of overloading the operator -> (pointer to member access):
The operator -> (pointer to member access) exhibits a different behavior from the other operators with respect to overloading:
It doesn't return only the user datatype as indicated in the overloaded procedure header,
but it returns this user datatype implicitly followed by the
operator . (member access).
The operator -> (pointer to member access) is mainly used often in conjunction with the operator * (Value of) to implement "smart pointers".
- Using smart pointer
The use of smart pointers allows automatic management of dynamic references created by New (each reference is destroyed automatically when its smart pointer goes out of scope), without even making any copy of these references.
Reminder of what a smart pointer:
A smart pointer is an object which behaves like a pointer but does more than a pointer.
This object is flexible as a pointer and has the advantage of being an object (like constructor and destructor called automatically).
Therefore, the destructor of the smart pointer will be automatically called when this object goes out of scope, and it will delete the user pointer.
As the smart pointer must behave like a pointer, it must support the same interface as a pointer does.
So it must support the following operations:
Dereferencing (
operator * (Value of))Indirection (
operator -> (pointer to member access))
The operator * (Value of) and the operator -> (pointer to member access) must return references (by means of using Byref As ..... in the declaration of there return type).
Example of a smart pointer (to UDT) with an interface:
public default-constructor
public copy-constructor
public destructor
private UDT pointer and public
operator cast (Cast)to access it in read only modeprivate operator
letto disallow assignment not implemented here (to avoid copying the pointers values only)operator * (Value of)andoperator -> (pointer to member access)
start GeSHi
Type UDT
Declare Constructor ()
Declare Destructor ()
Dim As String s = "object #0"
End Type
Constructor UDT ()
Print " UDT construction "; @This
End Constructor
Destructor UDT ()
Print " UDT destruction "; @This
End Destructor
Type SmartPointer
Public:
Declare Constructor () '' to construct smart pointer (and UDT object)
Declare Constructor (ByRef rhs As SmartPointer) '' to copy construct smart pointer
Declare Operator Cast () As UDT Ptr '' to cast private UDT pointer (for read only)
Declare Destructor () '' to destroy smart pointer (and UDT object)
Private:
Dim As UDT Ptr p '' private UDT pointer
Declare Operator Let (ByRef rhs As SmartPointer) '' to disallow assignment (to avoid copy of real pointers)
End Type
Constructor SmartPointer ()
Print "SmartPointer construction "; @This
This.p = New UDT
End Constructor
Constructor SmartPointer (ByRef rhs As SmartPointer)
Print "SmartPointer copy-construction "; @This; " from "; @rhs
This.p = New UDT
*This.p = *rhs.p
End Constructor
Operator SmartPointer.Cast () As UDT Ptr
Return This.p
End Operator
Destructor SmartPointer ()
Print "SmartPointer destruction "; @This
Delete This.p
End Destructor
Operator * (ByRef sp As SmartPointer) ByRef As UDT '' overloaded operator '*'
Print "SmartPointer operator '*'"
Return *Cast(UDT Ptr, sp) '' (returning byref)
End Operator '' to behave as pointer
Operator -> (ByRef sp As SmartPointer) ByRef As UDT '' overloaded operator '->'
Print "SmartPointer operator '->'"
Return *Cast(UDT Ptr, sp) '' (returning byref)
End Operator '' to behave as pointer
Scope
Dim sp1 As SmartPointer
Print "'" & sp1->s & "'"
sp1->s = "object #1"
Print "'" & sp1->s & "'"
Print
Dim sp2 As SmartPointer = sp1
Print "'" & (*sp2).s & "'"
(*sp2).s = "object #2"
Print "'" & (*sp2).s & "'"
Print
Dim sp3 As SmartPointer = sp1
Print "'" & sp3->s & "'"
*sp3 = *sp2
Print "'" & sp3->s & "'"
sp3->s = "object #3"
Print "'" & sp3->s & "'"
Print
End Scope
Sleepend GeSHi
Example of output:
SmartPointer construction 1703576
UDT construction 10693312
SmartPointer operator '->'
'object #0'
SmartPointer operator '->'
SmartPointer operator '->'
'object #1'
SmartPointer copy-construction 1703524 from 1703576
UDT construction 10693384
SmartPointer operator '*'
'object #1'
SmartPointer operator '*'
SmartPointer operator '*'
'object #2'
SmartPointer copy-construction 1703472 from 1703576
UDT construction 10693456
SmartPointer operator '->'
'object #1'
SmartPointer operator '*'
SmartPointer operator '*'
SmartPointer operator '->'
'object #2'
SmartPointer operator '->'
SmartPointer operator '->'
'object #3'
SmartPointer destruction 1703472
UDT destruction 10693456
SmartPointer destruction 1703524
UDT destruction 10693384
SmartPointer destruction 1703576
UDT destruction 10693312Example of an extended smart pointer type macro for any UDT (or any predefined type), with an extended interface:
public constructor
public reference counter in read only mode
public destructor
private UDT pointer and 2 public operators
castto access it in read only mode (numeric value and string value)private default-constructor to disallow self construction
private copy-constructor to disallow cloning
private operator
letto disallow assignmentoperator * (Value of)andoperator -> (pointer to member access)
start GeSHi
#Macro Define_SmartPointer (_UDTname_)
Type SmartPointer_##_UDTname_
Public:
Declare Constructor (ByVal rhs As _UDTname_ Ptr) '' to construct smart pointer
' '' from _UDTname_ pointer,
' '' with reference counter increment
Declare Static Function returnCount () As Integer '' to return reference counter value
Declare Operator Cast () As _UDTname_ Ptr '' to cast private _UDTname_ pointer
' '' to _UDTname_ pointer (read only)
Declare Operator Cast () As String '' to cast private _UDTname_ pointer
' '' to string (read only)
Declare Destructor () '' to destroy smart pointer
' '' and _UDTname_ object
' '' with reference counter decrement
Private:
Dim As _UDTname_ Ptr p '' private _UDTname_ pointer
Static As Integer Count '' private reference counter
Declare Constructor () '' to disallow default-construction
Declare Constructor (ByRef rhs As SmartPointer_##_UDTname_) '' to disallow copy-construction
Declare Operator Let (ByRef rhs As SmartPointer_##_UDTname_) '' to disallow copy-assignment
End Type
Dim As Integer SmartPointer_##_UDTname_.Count = 0
Constructor SmartPointer_##_UDTname_ (ByVal rhs As _UDTname_ Ptr)
If rhs <> 0 Then
This.p = rhs
SmartPointer_##_UDTname_.count += 1
End If
End Constructor
Static Function SmartPointer_##_UDTname_.returnCount () As Integer
Return SmartPointer_##_UDTname_.count
End Function
Operator SmartPointer_##_UDTname_.Cast () As _UDTname_ Ptr
Return This.p
End Operator
Operator SmartPointer_##_UDTname_.Cast () As String
Return Str(This.p)
End Operator
Destructor SmartPointer_##_UDTname_ ()
If This.p <> 0 Then
Delete This.p
SmartPointer_##_UDTname_.count -= 1
This.p = 0
End If
End Destructor
Operator * (ByRef sp As SmartPointer_##_UDTname_) ByRef As _UDTname_ '' operator '*' (return byref)
' '' to behave as pointer
Return ByVal sp '' 'Return *sp' would induce an infinite loop
End Operator
Operator -> (ByRef sp As SmartPointer_##_UDTname_) ByRef As _UDTname_ '' operator '->' (return byref)
' '' to behave as pointer
Return ByVal sp
End Operator
#Endmacro
'--------------------------------------------------------------------------------------------------------
' Example using all eight keywords of inheritance:
' 'Extends', 'Base.', 'Base()', 'Object', 'Is' operator, 'Virtual', 'Abstract', 'Override'
Type root Extends Object ' 'Extends' to activate RTTI by inheritance of predefined Object type
Public:
Declare Function ObjectHierarchy () As String
Declare Function ObjectName () As String
Declare Abstract Function ObjectRealType () As String '' 'Abstract' declares function without local body
' '' which must be overridden
Declare Virtual Destructor () '' 'Virtual' declares destructor
Protected:
Declare Constructor () '' to avoid default-construction from outside Types
Declare Constructor (ByRef _name As String = "") '' to avoid construction from outside Types
Declare Constructor (ByRef rhs As root) '' to avoid copy-construction from outside Types
Declare Operator Let (ByRef rhs As root) '' to avoid copy-assignment from outside Types
Private:
Dim Name As String
End Type '' derived type may be member data empty
Constructor root () '' only to avoid compile error (due to inheritance)
End Constructor
Constructor root (ByRef _name As String = "") '' only to avoid compile error (due to inheritance)
This.Name = _name
Print "root constructor:", This.Name
End Constructor
Function root.ObjectHierarchy () As String
Return "Object(forRTTI) <- root"
End Function
Function root.ObjectName () As String
Return This.Name
End Function
Virtual Destructor root ()
Print "root destructor:", This.Name
End Destructor
Operator root.Let (ByRef rhs As root) '' only to avoid compile error (due to onheritance)
End Operator
Type animal Extends root '' 'Extends' to inherit of root
Declare Constructor (ByRef _name As String = "")
Declare Function ObjectHierarchy () As String
Declare Virtual Function ObjectRealType () As String Override '' 'Virtual' declares function with local
' '' body which can be overridden
' '' 'Override' to check if the function is
' '' well an override
Declare virtual Destructor () Override '' 'Virtual' declares destructor with local body
' '' 'Override' to check if the destructor is well an override
End Type
Constructor animal (ByRef _name As String = "")
Base(_name) '' 'Base()' allows to call parent constructor
Print " animal constructor:", This.ObjectName()
End Constructor
Function animal.ObjectHierarchy () As String
Return Base.ObjectHierarchy & " <- animal" '' 'Base.' allows to access to parent member function
End Function
Virtual Function animal.ObjectRealType () As String
Return "animal"
End Function
Virtual Destructor animal ()
Print " animal destructor:", This.ObjectName()
End Destructor
Type dog Extends animal '' 'Extends' to inherit of animal
Declare Constructor (ByRef _name As String = "")
Declare Function ObjectHierarchy () As String
Declare Function ObjectRealType () As String Override '' 'Override' to check if the function is well an
' '' override
Declare Destructor () Override '' 'Override' to check if the destructor is well an override
End Type '' derived type may be member data empty
Constructor dog (ByRef _name As String = "")
Base(_name) '' 'Base()' allows to call parent constructor
Print " dog constructor:", This.ObjectName()
End Constructor
Function dog.ObjectHierarchy () As String
Return Base.ObjectHierarchy & " <- dog" '' 'Base.' allows to access to parent member function
End Function
Function dog.ObjectRealType () As String
Return "dog"
End Function
Destructor dog ()
Print " dog destructor:", This.ObjectName()
End Destructor
Type cat Extends animal '' 'Extends' to inherit of animal
Declare Constructor (ByRef _name As String = "")
Declare Function ObjectHierarchy () As String
Declare Function ObjectRealType () As String Override '' 'Override' to check if the function is well an
' '' override
Declare Destructor () Override '' 'Override' to check if the destructor is well an override
End Type '' derived type may be member data empty
Constructor cat (ByRef _name As String = "")
Base(_name) '' 'Base()' allows to call parent constructor
Print " cat constructor:", This.ObjectName()
End Constructor
Function cat.ObjectHierarchy () As String
Return Base.ObjectHierarchy & " <- cat" '' 'Base.' allows to access to parent member function
End Function
Function cat.ObjectRealType () As String
Return "cat"
End Function
Destructor cat ()
Print " cat destructor:", This.ObjectName()
End Destructor
Sub PrintInfo (ByVal p As root Ptr) '' parameter is a 'root Ptr' or compatible (smart pointer)
Print " " & p->ObjectName, " " & p->ObjectRealType, " ";
If *p Is dog Then '' 'Is' allows to check compatibility with type symbol
Print Cast(dog Ptr, p)->ObjectHierarchy
ElseIf *p Is cat Then '' 'Is' allows to check compatibility with type symbol
Print Cast(cat Ptr, p)->ObjectHierarchy
ElseIf *p Is animal Then '' 'Is' allows to check compatibility with type symbol
Print Cast(animal Ptr, p)->ObjectHierarchy
End If
End Sub
Define_SmartPointer(root) '' smart pointer definition
Scope
Print "reference counter value:"; SmartPointer_root.returnCount()
Print
Dim As SmartPointer_root sp(2) = {New animal("Mouse"), New dog("Buddy"), New cat("Tiger")}
Print
Print "reference counter value:"; SmartPointer_root.returnCount()
For I As Integer = 0 To 2
Print " " & sp(I), sp(I)->ObjectName()
Next I
Print
Print "Name:", "Object (real): Hierarchy:"
For I As Integer = 0 To 2
#if __FB_VERSION__ = "1.10.0" Or __FB_VERSION__ = "1.10.1"
PrintInfo(Cast(root Ptr, sp(I))) '' bug workaround
#else
PrintInfo(sp(I))
#endif
Next I
Print
End Scope
Print
Print "reference counter value:"; SmartPointer_root.returnCount()
Print
Sleepend GeSHi
Example of output:
reference counter value: 0
root constructor: Mouse
animal constructor: Mouse
root constructor: Buddy
animal constructor: Buddy
dog constructor: Buddy
root constructor: Tiger
animal constructor: Tiger
cat constructor: Tiger
reference counter value: 3
11145960 Mouse
11151496 Buddy
11151616 Tiger
Name: Object (real): Hierarchy:
Mouse animal Object(forRTTI) <- root <- animal
Buddy dog Object(forRTTI) <- root <- animal <- dog
Tiger cat Object(forRTTI) <- root <- animal <- cat
cat destructor: Tiger
animal destructor: Tiger
root destructor: Tiger
dog destructor: Buddy
animal destructor: Buddy
root destructor: Buddy
animal destructor: Mouse
root destructor: Mouse
reference counter value: 0Back to DocToc